UM11083
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
User Manual
Rev. 1.1 — 24 September 2018
3 of 16
NXP Semiconductors
LPCXpresso804
User Manual
1. Introduction
The LPCXpresso family of boards provides a powerful and flexible development system
for NXP's Cortex-M MCUs. They can be used with a range of development tools, including
the MCUXpresso IDE. The LPCXpresso804 board is developed by NXP to enable
evaluation of and prototyping with the LPC804 MCU.
shows the LPCXpresso804
main board. The board is also supplied with capacitive touch and PLU design prototyping
shield boards.
The LPCXpresso804 board includes the following features:
•
Compatible with MCUXpresso IDE and other popular toolchains (incl. IAR and Keil)
•
LPC804 Arm Cortex-M0+ MCU running at up to 15MHz
•
On-board CMSIS-DAP (debug probe) with VCOM port, based on LPC11U35 MCU
•
Debug connector to allow debug of target LPC804 MCU using an external probe
•
LPC804 ISP and User/Wake buttons
•
LPC804 Reset button
•
1Mb Winbond SPI flash
•
NXP LM75BDP temperature sensor
•
Programmable Logic Unit prototyping shield
•
Capacitive Touch evaluation shield
Fig 1.
LPCXpresso804 Board
