NXP Semiconductors
UM11192
User Manual for LPCXpresso54S018M Development Board
UM11192
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2019. All rights reserved.
User manual
Rev. 1.0
— 13th February 2019
30 of 34
Circuit ref
Description
Default
JP3 & JP4
Install these jumpers to provide termination on CAN/CAN-FD
connection 2.
Installed
JP5 & JP6
Install these jumpers to provide termination on CAN/CAN-FD
connection 2.
Installed
11.3 Installation
To install the Shield board, carefully align the J1 pin 1 of the Shield board with J9 pin 1 of
the LPCXpresso board, and J3 pin 1 of the Shield board with J10 pin 2 of the
LPCXpresso board, ensuring that all leads from the Shield are lined up with the
corresponding sockets of the LPCXpresso board. Apply even pressure to the Shield
board edges until its leads are fully seat in the sockets. It should not require much
pressure to install the Shield board; if the required force seems high, stop and re-check
the pins are aligned properly.
11.4 Drivers and example code
The MCUXpresso SDK package for the board includes drivers (called mcan drivers) and
examples using polling and interrupt methods.