NXP Semiconductors KW40 User Manual Download Page 11

Document Number: KW40HRMUG 

Rev. 0 

10/2015 

How to Reach Us:

 

Home Page:

 

freescale.com

 

Web Support:

 

freescale.com/support

 

Information in this document is provided solely to enable system and software implementers to 

use Freescale products. There are no express or implied copyright licenses granted hereunder to 

design or fabricate any integrated circuits based on the information in this document. 

Freescale reserves the right to make changes without further notice to any products herein. 

Freescale makes no warranty, representation, or guarantee regarding the suitability of its 

products for any particular purpose, nor does Freescale assume any liability arising out of the 

application or use of any product or circuit, and specifically disclaims any and all liability, 
including without limitation consequential or incidental damages. “Typical” parameters that may 

be provided in Freescale data sheets and/or specifications can and do vary in different 

applications, and actual performance may vary over time. All operating parameters, including 
“typicals,” must be validated for each customer application by customer's technical experts. 

Freescale does not convey any license under its patent rights nor the rights of others. Freescale 

sells products pursuant to standard terms and conditions of sale, which can be found at the 

following address

freescale.com/SalesTermsandConditions

Freescale and the Freescale logo are trademarks of Freescale Seminconductor, Inc.Reg. U.S. Pat. 

& Tm. Off

.

 All other products or service names are the property of their respective owners.

 

ARM, the ARM Powered logo, and Cortex are registered trademarks of ARM Limited (or its 
subsidiaries) in the EU and/or elsewhere. 

  

© 2015 Freescale Semiconductor, Inc. All rights reserved. 

Summary of Contents for KW40












Reviews: