NXP Semiconductors KE1xF Series, Reference Manual, Page: 632 / 1483

See AN4503: Power Management for Kinetis and C MCUs for further details on
using the RCM.
24.3 Reset memory map and register descriptions
The RCM Memory Map/Register Definition can be found here.
The Reset Control Module (RCM) registers provide reset status information and reset
filter control.
NOTE
The RCM registers can be written only in supervisor mode.
Write accesses in user mode are blocked and will result in a bus
error.
RCM memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
4007_F000 Version ID Register (RCM_VERID) 32 R 0300_0003h 24.3.1/632
4007_F004 Parameter Register (RCM_PARAM) 32 R See section 24.3.2/634
4007_F008 System Reset Status Register (RCM_SRS) 32 R 0000_0082h 24.3.3/636
4007_F00C Reset Pin Control register (RCM_RPC) 32 R/W 0000_0000h 24.3.4/639
4007_F010 Mode Register (RCM_MR) 32 R/W See section 24.3.5/640
4007_F014 Force Mode Register (RCM_FM) 32 R/W 0000_0000h 24.3.6/641
4007_F018 Sticky System Reset Status Register (RCM_SSRS) 32 R/W 0000_0082h 24.3.7/642
4007_F01C System Reset Interrupt Enable Register (RCM_SRIE) 32 R/W 0000_0000h 24.3.8/644
24.3.1 Version ID Register (RCM_VERID)
Address: 4007_F000h base + 0h offset = 4007_F000h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
MAJOR MINOR FEATURE
W
Reset
0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
RCM_VERID field descriptions
Field Description
31–24
MAJOR
Major Version Number
Table continues on the next page...
Reset memory map and register descriptions
Kinetis KE1xF Sub-Family Reference Manual, Rev. 4, 06/2019
632 NXP Semiconductors