NXP Semiconductors K32 L2A Series, Reference Manual, Page: 905 / 1379

35.3.1.8 Lock Access Register (MTBx_LOCKACCESS)
The Lock Access Register enables a write access to component registers. It is hardwired
to specific values used during the auto-discovery process by an external debug agent.
Address: F000_0000h base + FB0h offset = F000_0FB0h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
LOCKACCESS
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MTBx_LOCKACCESS field descriptions
Field Description
LOCKACCESS Hardwired to 0x0000_0000
35.3.1.9 Lock Status Register (MTBx_LOCKSTAT)
The Lock Status Register indicates the status of the lock control mechanism. This register
is used in conjunction with the Lock Access Register. It is hardwired to specific values
used during the auto-discovery process by an external debug agent.
Address: F000_0000h base + FB4h offset = F000_0FB4h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
LOCKSTAT
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MTBx_LOCKSTAT field descriptions
Field Description
LOCKSTAT LOCKSTAT
Hardwired to 0x0000_0000
35.3.1.10 Authentication Status Register (MTBx_AUTHSTAT)
The Authentication Status Register reports the required security level and current status
of the security enable bit pairs. Where functionality changes on a given security level,
this change must be reported in this register. It is connected to specific signals used
during the auto-discovery process by an external debug agent.
Chapter 35 Micro Trace Buffer (MTB)
K32 L2A Reference Manual, Rev. 2, 01/2020
NXP Semiconductors 905