NXP Semiconductors
IoT_ZTB
IoT_ZTB-DK006 Development Kit User Guide
UM11393
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2020. All rights reserved.
User Guide
Rev.1.0
— 20 Apr 2020
11 of 21
3. K32W061 Modules
K32W061 Module board is the K32W061 minimum system board. The module should be
mounted to carrier board as the target. There is a RF connector on this board, which can
be used to RF signal testing.
4. JN5189 Modules
The JN5189 Module board is identical to the K32W061 modules but with a JN5189 fitted.
Generic expansion board
This expansion board is available in the development kit and is compatible with Arduino
shields. They are supplied pre-fitted with Arduino-compatible header of Carrier Boards in
the development kit.
The Generic Expansion Board has the following features:
•
Arduino-compatible expansion header (in four parts, CN1-CN4)
•
4 user-input buttons (SW1, SW2, SW3, SW4) connected to DIOs on
the K32W061 module on the Carrier Board:
o
SW1 is connected to IO19
o
SW2 is connected to IO15
o
SW3 is connected to IO7
o
SW4 is connected to IO4
•
4 LEDs (D1, D2, D3, D4) connected to DIOs on the K32W061 module
on the Carrier Board:
o
D1 is connected to IO16
o
D2 is connected to IO6 (same as for the PWM output used
on the Lighting/Sensor Expansion Board to drive the three
white LEDs)
o
D3 is connected to IO3
o
D4 is an optional LED which is not fitted on the supplied
board and shares IO4 with button SW1
•
Potentiometer connected to K32W061 ADC0, with a 0-1.8V DC
voltage swing
Figure 6 K32W061 module board
