10
BOOT PROCESS FOR LINUX
®
IMAGE
Boot Process
• Switch SW1 to ON, ON, OFF, ON (from 1-4 bit) to boot from the SD card, as shown
in Figure 4. The first three switches named “0”, “1”, “2” are used to choose the
BOOT mode. The last one named “SYS_ID_WP” is used for write protection of the
System ID memory (the ON position, by default, prevent write operation to such
memory).
• Power on the EVK board.
• During the boot process, there will be console prints on the terminal window of the
PC (if connected).
• To work from the terminal window on the host PC, press ‘Enter’ at the terminal
window to get the command prompt. Account name: root, password none.
Figure 3:
BOOT MODE switch of i.MX 8XLite EVK