background image

Insert  
TWRPIs

Insert the desired TWRPIs in the 
respective sockets. The TWRPIs are 
keyed and uniquely spaced such that 
the sockets will only accept general-
purpose TWRPIs that are aligned 
properly. For your convenience, there 
is a mounting hole that can be used to 
mount an antenna when working with 
select radio-based TWRPIs.

Assemble Your  
Tower System

Assemble your Tower System, including 
a Tower System controller module 
and the TWR-TWRPI-BD module with 
inserted TWRPIs.

Refer to Additional  
Materials

The TWR-TWRPI-BD provides access  
to Tower plug-ins from signals available 
on the Tower elevator edge connectors. 
Refer to the respective TWRPI 
documentation for details regarding the 
use and functionality of the TWRPI. 
Refer to the jumper table in the 
document and the TWR-TWRPI-BD  
user manual for additional details 
regarding with signals are available to 
each TWRPI socket. Refer to  

freescale.com/Tower

 for additional 

information on the TWR-TWRPI-BD  
and available TWRPIs.

TOWER SYSTEM

Quick Start Guide

Identify  
TWRPIs

Identify the desired TWRPIs to be 
utilized with the TWR-TWRPI-BD and 
the respective interfaces required for 
each TWRPI.

Configure  
Jumpers

Configure the TWR-TWRPI-BD jumpers 
to correctly interface with the respective 
TWRPI. Refer to the jumper table in  
this document for reference and the user 
manual for additional details. Be aware 
that not all controller modules will provide 
access to all signals available on the 
TWR-TWRPI-BD. Refer to the respective 
controller module documentation for 
details of which signals are available.

Ensure  
Compatibility

Each interface featured on the  
TWR-TWRPI-BD is capable of being 
isolated from the Tower System. To 
maintain the best compatibility with 
additional Tower peripheral module, 
it is recommended that any unused 
interfaces be isolated.

Step-by-Step Installation Instructions 

In this quick start guide you will learn to set up the TWR-TWRPI-BD module and run 
the included demostration software. For more detailed information, review the user 
manual at 

freescale.com/Tower

1

3

5

6

4

2

5

4

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Summary of Contents for Freescale TWR-TWRPI-BD








Reviews: