manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 638

Table 32-51. Read Resource Command FCCOB Requirements (continued)

FCCOB Number

FCCOB Contents [7:0]

7

Read Data [7:0]

User-provided values

8

Resource Select Code (see 

Table 32-52

)

1. Must be longword aligned (Flash address [1:0] = 00).

Table 32-52. Read Resource Select Codes

Resource

Select Code

Description

Resource Size

Local Address Range

0x00

Program Flash 0 IFR

256 Bytes

0x00_0000–0x00_00FF

0x01

1

Version ID

8 Bytes

0x00_0000–0x00_0007

1. Located in program flash 0 reserved space.

After clearing CCIF to launch the Read Resource command, four consecutive bytes are
read from the selected resource at the provided relative address and stored in the FCCOB
register. The CCIF flag sets after the Read Resource operation completes. The Read
Resource command exits with an access error if an invalid resource code is provided or if
the address for the applicable area is out-of-range.

Table 32-53. Read Resource Command Error Handling

Error Condition

Error Bit

Command not available in current mode/security

FSTAT[ACCERR]

An invalid resource code is entered

FSTAT[ACCERR]

Flash address is out-of-range for the targeted resource.

FSTAT[ACCERR]

Flash address is not longword aligned

FSTAT[ACCERR]

32.4.10.4 Program Longword Command

The Program Longword command programs four previously-erased bytes in the program
flash memory using an embedded algorithm.

CAUTION

A flash memory location must be in the erased state before
being programmed. Cumulative programming of bits (back-to-
back program operations without an intervening erase) within a
flash memory location is not allowed. Re-programming of
existing 0s to 0 is not allowed as this overstresses the device.

Functional Description

KV4x Reference Manual, Rev. 2, 02/2015

638

Preliminary

Freescale Semiconductor, Inc.

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands