manualshive.com logo in svg

NXP Semiconductors freescale KV4 Series, Reference Manual

Share
Download
NXP Semiconductors freescale KV4 Series Reference Manual Download Page 229

Table 14-13. ReadMemoryResponse Parameters

Byte #

Parameter

Descripton

0 - 3

Status code

The status of the associated Read Memory command.

4 - 7

Data byte count

The number of bytes sent in the data phase.

14.2.6 Flashloader Command API

All Kinetis Flashloader command APIs follow the command packet format that is
wrapped by the framing packet, as explained in previous sections.

• For a list of commands supported by the Flashloader, see 

Table 14-1

, Commands

supported.

• For a list of status codes returned by the Kinetis Flashloader, see 

Table 14-35

,

Kinetis Flashloader Status Error Codes.

14.2.6.1 GetProperty command

The GetProperty command is used to query the flashloader about various properties and
settings. Each supported property has a unique 32-bit tag associated with it. The tag
occupies the first parameter of the command packet. The target returns a
GetPropertyResponse packet with the property values for the property identified with the
tag in the GetProperty command.

Properties are the defined units of data that can be accessed with the GetProperty or
SetProperty commands. Properties may be read-only or read-write. All read-write
properties are 32-bit integers, so they can easily be carried in a command parameter.

For a list of properties and their associated 32-bit property tags supported by the Kinetis
Flashloader, see 

Table 14-31

.

The 32-bit property tag is the only parameter required for GetProperty command.

Table 14-14. Parameters for GetProperty Command

Byte #

Command

0 - 3

Property tag

Chapter 14 Kinetis Flashloader

KV4x Reference Manual, Rev. 2, 02/2015

Freescale Semiconductor, Inc.

Preliminary

229

Summary of Contents for freescale KV4 Series
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands