Introduction, Rev. 0
Freescale Semiconductor
1-1
Preliminary
Chapter 1
Introduction
The 56F8014 Socket Board provides a means to program the Flash memory in a 56F8014
controller, then allows the 56F8014 controller to be removed and placed onto another printed
circuit board.
Some packages are not available at publication.
1.1 56F8014 Socket Board
Architecture
The 56F8014 Socket Board contains a Zero Insertion Force LQFP-32 socket and a Zero Insertion
Force PDIP-32 socket, as shown in
. This combination of sockets allows both
56F8014 package types to be easily supported. Additionally, the PCB includes a JTAG
connector, manual reset pushbutton switch and Daughter Card connector.
The 56F8014 Socket Board is designed to be used with a 56F8014 Demonstration Board. The
power supply and JTAG interface POD used with the 56F8014 Demonstration Board are needed
to provide an operational Flash programming platform.
P3
56F8014 Demonstration Board
J1
P1
P2
56F8014 Socket Board
P1
J1
RESET
POWER ON
U1
U2
JTAG
Figure 1-1. Connecting the 56F8014 Socket Board & 56F8014 Demonstration Board
Summary of Contents for freescale 56F8014
