NXP Semiconductors freescale 56F8014 User Manual Download Page 14

56F8014 Socket Board User Guide, Rev. 0

2-2

 Freescale Semiconductor 

 

Preliminary

2.2   32-Pin PDIP Socket

The 56F8014 Socket Board uses an ARIES 32-pin PDIP Universal Zero Insertion Force (ZIF) 
socket, 32-6554-11, designated as U2 on the board. The locking action of the socket is controlled 
by a lever arm on the side of the socket. When the lever arm is raised, the socket’s contact pins 
are released, allowing the removal or insertion of the part. When the lever arm is lowered, the 
socket’s contact pins press against the pins on the part, providing an electrical connection.

NOTE: Parts should only be installed or removed from the PDIP-32 socket when power is 

not

 

present on the 56F8014 Socket Board. Also, only one socket should have a part present at one 
time.

2.3   JTAG Connector

The 56F8014 Socket Board provides a JTAG Connector, J1. This connector allows the PC to 
communicate with a 56F8014 part in the LQFP-32 socket or in the PDIP-32 socket.

2.4   Daughter Card Connector

The 56F8014 Socket Board uses a Daughter Card Connector, P1. This connector provides power 
to the 56F8014 Socket Board via the 56F8014 Demonstration Board. Power (+3.3V DC) is 
present on pin 1 of P1 and the ground is present on pin 3 of P1.

2.5   Power-On LED

The 56F8014 Socket Board provides a Power-On LED, LED1, which illuminates when power is 
applied to the 56F8014 Socket Board.

2.6   Manual Reset

The 56F8014 Socket Board provides a Manual Reset Pushbutton, S1, which allows the manual 
generation of a reset signal to the 56F8014 part in either the U1 or U2 socket.

2.7   Test Points

The 56F8014 Socket Board provides two power monitoring test points, TP1 and TP2. TP1 is 
connected to +3.3V and TP2 is connected to digital ground.

Summary of Contents for freescale 56F8014

























Reviews: