NXP Semiconductors
AN13500
EdgeLock A5000 Secure Authenticator for electronic anti-counterfeit protection using device-to-device
authentication
Figure 12. ssscli se05x help
The following commands will list all A5000 secure objects:
ssscli connect auth t1oi2c none
ssscli se05x readidlist
Figure 13. ssscli readidlist
Note:
If you are not able to connect to the A5000 with an error saying that there is a
session already open, run
ssscli se05x disconnect
first.
To close a session use:
ssscli disconnect
4.4 Pre-provisioned A5000 device certificates used by the example
Examples described in this document are using the following pre-provisioned credentials
listed in the table below.
AN13500
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2022. All rights reserved.
Application note
Rev. 1.0 — 28 March 2022
15 / 45
