2
DEMOEM User Manual
•
DEMOEM Base Board and Daughter Card schematic
•
P&E Embedded Multilink Toolkit applications
•
P&E Embedded Multilink driver installation guide and resources
1.5
Handling Precautions
Take care to handle the package contents, including the DEMOEM Base
Board and DCF51EM256 Daughter Card, in a manner such as to prevent
electrostatic discharge.
2
HARDWARE FEATURES
The DEMOEM is a demonstration and development system for Freescale’s
MCF51EM256 microcontrollers. Application development is quick and easy
using P&E’s Embedded Multilink circuitry and the included software tools and
examples. An optional BDM port is provided to allow the use of an external
BDM interface such as P&E’s Cyclone PRO automated programmer or USB
Multilink. The USB Multilink is functionally comparable to the DEMOEM’s
Embedded Multilink circuitry.
Note:
The DEMO board’s onboard Embedded Multilink circuitry is intended to
function with the onbaord processor and any daughter cards that may be
included. It cannot be used to communicate with other devices.
2.1
DEMOEM Base Board Features
•
On-board Logic Analyzer
•
On-board Virtual Serial Port
•
Four (4) asymmetrically positioned 13x2 male connectors for
interchangeable daughter cards
•
P&E’s Embedded Multilink circuitry populated on the underside
•
SCI signals connected to P&E’s Embedded Multilink through jumpers
Board:
•
Mother/daughter card approach. Daughter card contains only MCU
and power bypass caps: