NXP Semiconductors 3527911, Quick Start Manual

Page: 17 / 18

16
www.nxp.com
Make sure status is “activated”
Press button on board to explore
GPIO functionality
Select ON/PWM/OFF to explore
GPIO and PWM functionality
Change brightness of LED in a loop
Explore NTAG 5 switch
demo board
Make sure status is “activated”
Move board with phone to see X/Y
orientation
Write/read photo to/from the FRAM
NOTE: FRAM is not initialized. Writing
the NXP logo or a photo to the FRAM
should be the first step
Change Energy harvesting voltage
Explore NTAG 5 link
demo board
3
4
STEP-BY-STEP INSTRUCTIONS (cont.)
Status changes from “polling” to
“activated” as soon board is detected
Explore read range of
boards
On NTAG 5 customer development
board web page you will find all
documentation, source files and the
boards itself
Curios? Order our
Development board
5
6