Nxg NX-HDMIM Operating Instructions Download Page 2

PANEL DESCRIPTIONS

2

3

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

TABLE OF CONTENTS 

Introduction
Package Contents
Panel Descriptions
Connect and Operation
Specifications
Warranty & Service

PACKAGE CONTENTS

1) Main unit. 4x4 HDMI Matrix
2) 5VDC Power Supply
3) 1x Remote.
4) 4x IR-TX cable
5) 4x IR-RX cable
6) 4x IR-RX cable extender jacks
7) Operating Instructions

Front panel

1) Power switch
2) IR TX out 1 to 4
3) IR window   
4) Output and Input selection / indicator
5) Locking status indicator
6) Key lock selection 
7) USB port for ISP only, firmware upgrade port
8) DIP switch

TYPICAL APPLICATION

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or other harsh chemicals
to clean this unit.

IR receiver cable extender jacks. 

When the display device is not near to the matrix, the IR cable will be too short. There is a pair
of jacks supplied for extending the IR (RX) cable. Please use an appropriate (min. 3 conductor
shielded  audio  cable)  or  an  additional  CAT5e /CAT6  cable  to  form  the  IR  cable  extender.
Additional wires unused should be grounded at the connector on the Matrix end of the line only.
Use the male jack and female jack to extend the IR_RX cable like the picture below.

Tip = IR Signal,  Ring = Power,  Sleeve = IR Ground

1

3

4

5 6

7 8

2

Summary of Contents for NX-HDMIM

Page 1: ...ID functionality USB port for upgrading firmware Supports 3D video formats Compact size DEAR CUSTOMER Thank you for purchasing this NXG Technology product For optimum performance and safety please read these instructions carefully before connecting and operating this product Please keep this manual in a safe place for future reference NOTE NXG Technology reserves the right to make changes in the h...

Page 2: ...nly firmware upgrade port 8 DIP switch TYPICAL APPLICATION MAINTENANCE Clean this unit with a soft dry cloth Never use alcohol paint thinner or other harsh chemicals to clean this unit IR receiver cable extender jacks When the display device is not near to the matrix the IR cable will be too short There is a pair of jacks supplied for extending the IR RX cable Please use an appropriate min 3 condu...

Page 3: ...utput HDMI 1 2 version There are two modes within the Matrix to update the EDID data according to the DIP setting When the DIP is in 0 0 0 it is in default MIX mode Default will automatically output in HDMI 1 2 version signals 1080i 1080P and 2CH stereo audio In most situations the default mode is ideal for the application EXAMPLE A When the source is a HDMI 1 3 and OUTPUTS 1 through 4 will suppor...

Page 4: ...CHNOLOGY ALL OF WHICH ARE EXPRESSLY DISCLAIMED NXG TECHNOLOGY HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION QUALITY DURABILITY DESIGN OPERATION CAPACITY FITNESS FOR USE OR SUITABILITY OF THE NXG PRODUCT Exclusion of Certain Damages NXG Technology s liability for any defective product is limited to repair or replacement of prod uct...

Reviews: