NX NX-602A, User Manual

Page: 13 / 24

13
Place the unit in the desired position and unravel the mains
cable Insert the cable into the supply socket and switch on if
applicable
AUTO STAND-BY
To save power, the Soundbar automatically switches to
stand-by if:
•
No Audio is available from the connected input for more
than 10 minutes
• When the unit is power ON
INPUT MODE SELECTION
The LED will turn red in Standby mode, press the remote
power button or the power button on the Soundbar to turn
OFF Stand-by mode Th red LED will turn OFF indicating the
unit is no longer in Stand-by mode
9�0 CONNECTING TO EXTERNAL AUDIO DEVICES
OPTICAL INPUT (REQUIRES AN OPTICAL
CABLE, NOT PROVIDED)
1 Connect an Optical cable to the optical input on the
back panel of the Soundbar Connect the other end of
the Optical cable to the digital audio device
2 Press the button to turn the unit on
3 Press the
MODE button repeatedly until the LED above
LIN/OPT turns green