Visit: nvx.com
|
Call: 213.444.1689
|
15303 Ventura Blvd. 9th Floor, Sherman Oaks, CA 91403
4
BLUETOOTH
|
XBTL6
CONTROLS
POWER ON/OFF
•
POWER ON:
hold
(~3 seconds)
Multi-Purpose Button
until LED flashes blue.
•
POWER OFF:
hold (~3 seconds)
Multi-Purpose Button
until LED stops
flashing blue.
CHARGING
*
•
Connect the headphone to a PC or power
adapter using the USB charging cable.
•
The LED light will alternate red and pink when on
and will remain solid red when powered off while
headphones are charging.
•
The LED light will turn off when the headphones
are fully charged.
PAIRING
•
Headphones will be in pairing mode while on.
•
Place the headphones and the mobile phone/
music player within 3 ft. (1 Meter) of each other
when pairing.
•
Open the Bluetooth
®
settings on your device and
select “XBTL6” from the Bluetooth
®
device list.
•
Some devices require a pin code. If this is the
case, enter the code “0000.”
•
Once your devices are successfully paired, the
LED light will flash blue at a slower pace (once
every few seconds).
