•
Transmit 10/100 BaseT Full Duplex Ethernet up to 1,000ft (305m)* over 4-pair cat5;
750ft (228m) over 18/2 (or similar 2-wire cable); 500ft (150m) over Shielded Twisted-Pair
•
Powers PoE entry stations (or other PoE, PoE+, or High Power devices), up to 60 watts*
•
48or 56VDC is distributed over 2-wire cable to all connected IP devices
•
One NVT Eo2
TM
transceiver at the network-end can support multiple remote Eo2
TM
transceivers and connected devices
•
Up to four Eo2
TM
transceivers can be rack mounted on an NV-RMEC16U Eo2
TM
Rack
Mount Tray Kit, connecting up to 16 entry stations or contact closures
•
Easy configuration, no PC required
•
Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast etc.)
•
Advanced 128-bit AES encrypted transmission and PoE+ power technology
•
Built-in transient protection; Industrial temperature range
•
Available in 1-4 device Eo2
TM
System Kits
•
Limited lifetime warranty
The NVT Model NV-EC1701U Eo2
TM
Ethernet over 2-Wire Transceiver is a compact media converter that
allows 10/100 BaseT Ethernet and PoE power to be transmitted using UTP, STP,18/2, or similar cable.
These devices are often used in legacy installations where existing wire is re-used as part of an upgrade
to IP devices. 48 or 56VDC class 2 power is delivered to one transceiver, which distributes it to up to four
remote transceivers, and their PoE or PoE+ devices.
These transceivers are extremely simple to use, with no PC configuration required. Status LEDs indicate
power and link connectivity/activity for RJ45 and 2-wire ports. The NV-EC1701U is backed by NVT’s
award winning customer support and limited lifetime warranty.
*Distance and number of devices supported may be lower due to attenuation/voltage-drop on the wire. See Wire Distance charts on page 7.
Page 2 of 12
PRODUCT OVERVIEW
Model NV-EC1701U Eo2
TM
Ethernet over 2-Wire Transceiver
with PoE+ or High Power PoE