Note the following:
All of the above instructions provide basic installation information necessary for the proper
and safe functioning of this equipment. Persons installing or maintaining this product must
read all of the safety instructions and the parts of system grounding, which are applicable
to the system being maintained. Only trained, qualified service personnel shall install or
maintain this product.
Compliance and Environmental Information
All the compliance and environmental information is available on our website
www.nvtphybridge.com
• Refer to the FLEX24 or FLEX8 Quick Install Guides under “Safety Warnings” for the FLEX adapters
• Reportez-vous aux Quick Install Guides FLEX24 ou FLEX8 sous "Safety Warnings" pour les adaptateurs FLEX
• Beachten Sie die FLEX24- oder FLEX8- Quick Install Guides unter "Safety Warnings” für die FLEX-Adapter
• Consulte las Quick Install Guides FLEX24 o FLEX8 bajo "Safety Warnings" para los adaptadores FLEX
• Katso FLEX24- tai FLEX8 Quick Install Guides FLEX-sovittimien "Safety Warnings" alla
• Raadpleeg de FLEX24 of FLEX8 Quick Install Guides onder "Safety Warnings" voor de FLEX-adapters
• Se FLEX24 eller FLEX8 Quick Install Guides under "Safety Warnings" för FLEX-adaptrarna
• Se FLEX24 eller FLEX8 Quick Install Guides under "Safety Warnings" for FLEX-adaptere
• Ανατρέξτε στους οδηγούς FLEX24 ή FLEX8 Quick Install Guides στην ενότητα "Safety Warnings" για τους προσαρμογείς
FLEX
• Fare riferimento alla sezione FLEX24 o FLEX8 Quick Install Guides sotto "Safety Warnings" per gli adattatori FLEX
• Consulte o FLEX24 ou FLEX8 Quick Install Guides em "Safety Warnings" para os adaptadores FLEX
• Irreferi għall-FLEX24 jew FLEX8 Quick Install Guides taħt "Safety Warnings" għall-adapters FLEX
• Vaadake FLEX24 või FLEX8 Quick Install Guides alusel "Safety Warnings" FLEX adapterid
• A FLEX adapterek "Safety Warnings" című részében olvassa el a FLEX24 vagy a FLEX8 Quick Install Guides című részt
• Nanašajo na FLEX24 ali FLEX8 Quick Install Guides pod "Safety Warnings" za FLEX adapterji
• Další informace naleznete v příručkách FLEX24 nebo FLEX8 Quick Install Guides v části "Safety Warnings" pro adaptéry FLEX
• Kreiptis į FLEX24 ar FLEX8 Quick Install Guides pagal "Safety Warnings" Už FLEX adapteriai
• Skatiet FLEX24 vai FLEX8 Quick Install Guides zem "Safety Warnings", lai FLEX adapteri
• Pozrite si FLEX24 alebo FLEX8 Quick Install Guides v časti "Safety Warnings" pre adaptéry FLEX
• Sjá FLEX24 eða FLEX8 Quick Install Guides undir "Safety Warnings" fyrir FLEX-millistykki
• Zobacz FLEX24 lub FLEX8 Quick Install Guides w sekcji "Safety Warnings" w przypadku adapterów FLEX
• Se FLEX24 eller FLEX8 Quick Install Guides under "Safety Warnings" for FLEX-adaptere
• Consultați ghidurile FLEX24 sau FLEX8 Quick Install Guides din secțiunea "Safety Warnings" pentru adaptoarele FLEX
• Обърнете се към FLEX24 или FLEX8 Quick Install Guides в "Safety Warnings" за адаптери FLEX
• Keep these instructions with the equipment.
• Do not attempt to install or service this equipment unless you are skilled in the installation
and maintenance of electronic telecommunications equipment and have successfully
completed specific training for this equipment.
WARNING:
FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN IMPROPER EQUIPMENT OPERATION
AND/OR RISK OF ELECTRICAL SHOCK.
WARNING:
ANY CONNECTION TO AN OUTSIDE PLANT LEAD, AN OFF-PREMISE APPLICATION, OR ANY OTHER
EXPOSED PLANT APPLICATION MAY RESULT IN A FIRE OR SHOCK HAZARD, AND/OR DEFECTIVE OPERATION,
AND/OR EQUIPMENT DAMAGE.
Safety Warnings and Precautions
FLEX-Link
• CAUTION,
Hot surface
• ATTENTION,
Surface chaude
• VORSICHT,
Heiße Oberfläche
• PRECAUCIÓN,
Superficie caliente
• VAROITUS,
Kuuma pinta
• VOORZICHTIGHEID,
Heet oppervlakte
• VARNING,
Varm yta
• ADVARSEL,
Varm overflade
• ΠΡΟΣΟΧΗ,
Καυτή επιφάνεια
• ATTENZIONE,
Superficie calda
• CUIDADO,
Superfície quente
• ATTENZJONI
, Wiċċ sħun
• ETTEVAATUST,
Kuum pind
• VIGYÁZAT,
Forró felület
• PREVIDNOST,
Vroča površina
• POZOR,
Horký povrch
• ATSARGIAI,
Karštas paviršius
• UZMANĪBU
, Karstā virsma
• POZOR,
Horúci povrch
• VARÚÐ, Heitt yfirborð
• PRZESTROGA,
Gorąca powierzchnia
• FORSIKTIG,
Varm overflate
• PRUDENȚĂ,
Suprafata fierbinte
Technical Specifications
888.901.3633 | +44 (0) 208 977 6614
www.nvtphybridge.com
Technical Support
The NVT Phybridge Technical Support Group is available to assist you with product
installation, configuration, monitoring and troubleshooting procedures. Should you
experience trouble with this equipment or for repair or warranty information, please
contact NVT Phybridge at www.nvtphybridge.com/support/ or directly through email at
[email protected]
Warranty:
The FLEX adapters are backed by NVT Phybridge’s award-winning customer
support and 5-year warranty.
Support and Warranty
PoE Power Available to FLEX-Link
Copyright 2019 NVT Phybridge
445-0020-A
FLEX-Link
20ft
(6m)
250ft
(76m)
500ft
(152m)
750ft
(228m)
1,000ft
(305m)
1,250ft
(381m)
1,500ft
(457m)
1,750ft
(533m)
2,000ft
(610m)
Cat6 4-Pairs
50W
48
46
44
42
39
37
35
33
Cat6 2-Pairs
30W
30
29
28
26
24
22
20
18
Cat5e 4-Pairs
50W
47
44
41
38
35
33
30
27
Cat5e 2-Pairs
30W
30
28
25
23
20
18
15
12
Model Number
FLEX-Link
Part Number
NV-FLXLK
Dimensions
8.8cm x 5.0cm x 2.5cm (LxWxH);
3.46” x 1.97” x 0.98” (LxWxH)
Weight
106g (3.74oz.)
Interface: Network
Infrastructure side
(FLEX)
1 RJ45 port: UTP/STP cable (1-pair, 2-
pair or 4-pair)
Interface: IEEE Side
(IP Device)
1 RJ45 port; adapter is IEEE 802.3
af/at compliant and will negotiate
power requirements with IP end
device
Power Supply
PoE from the FLEX24 switch or
external power supply; maximum
50W (over 4-pairs) or 30W (over 2-
pairs)
Power
Consumption
1.5W
DC IN
Optional (sold separately)
48-56VDC via an external AC/DC
Power Adapter (IEC Class II isolated
only)
NOTE 1: Local power supply used
must have its output isolated from
Earth potential.
NOTE 2: If voltage of local power
supply is lower than the power
voltage provided from the PoE
switch, then power on the PoE
switch should be turned o
ff
.
Operating
Temperature
-40C to +70C (-40F to +158F)
Tests conducted against international
safety standard at maximum ambient
temperatures of 60ºC at 30W and 50ºC
at 50W
Mean Time Before
Failure (MTBF)
20+ years
Humidity
10% to 95% (non-condensing) at
35° C
