888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
Copyright 2018 NVT Phybridge | 445-0009-B | Page 2
Technical Specifications
Model Number
EC-Link+
EC-Base
EC4
Part Number
NV-ECLK-PLS
NV-ECLK-BSE
NV-EC-04
Dimensions
10.09cm x 5.03cm x 2.57cm (LxWxH);
3.97” x 1.98” x 1.01” (LxWxH)
10.09cm x 5.03cm x 2.57cm (LxWxH);
3.97” x 1.98” x 1.01” (LxWxH)
11cm x 7cm x 2.5cm (LxWxH);
4.3” x 2.75” x 0.98” (LxWxH)
Weight
108g (3.81oz.)
108g (3.81oz.)
96g (3.38oz.)
Interface: Network
Infrastructure side
(CLEER)
1 BNC port: Coax cable (RG59, RG6, RG11)
1 BNC port: Coax cable (RG59, RG6, RG11)
1 BNC port: Coax cable (RG59, RG6, RG11)
Interface: IEEE Side (IP
Device)
1 RJ45 port; adapter is IEEE 802.3af/at compliant and will
negotiate power requirements with IP end device.
(For General/PoE Switch)
1 RJ45 port: supports negotiation with IEEE 802.3 af/at switches
4 RJ45 ports: device must be IEEE 802.3 af/at compliant,
10/100Mbps connection to IP end device
Power Supply
Maximum 50W (If locally powered and 30W if power provided
from switch) delivered on 4 pairs.
PoE from standard PoE switch, or external power supply;
maximum 50W if locally powered.
PoE from the CLEER switch, or external power supply; maximum
50W (over 4-pairs) each port
DC IN
(Barrel Connector)
Optional (sold separately)
48V – 56VDC via an external AC/DC Power Adapter (IEC Class II
isolated only)
NOTE 1: Local power supply used must have its output isolated
from Earth potential.
NOTE 2: If voltage of local power supply is lower than the power
voltage provided from the PoE switch, then power on the PoE
switch should be turned off.
Optional (sold separately)
48V – 56VDC via an external AC/DC Power Adapter (IEC Class II
isolated only)
NOTE 1: Local power supply used must have its output isolated
from Earth potential.
NOTE 2: If voltage of local power supply is lower than the power
voltage provided from the PoE switch, then power on the PoE
switch should be turned off.
Optional (sold separately)
48V – 56VDC via an external AC/DC Power Adapter (IEC Class II
isolated only)
NOTE 1: Local power supply used must have its output isolated
from Earth potential.
NOTE 2: If voltage of local power supply is lower than the power
voltage provided from the PoE switch, then power on the PoE
switch should be turned off.
Power Consumption
1.1W
1W
1W
Operating Temperature
-58°F to +158°F (-50°C to +70°C)
Tests conducted against international safety standard at maximum
ambient temperatures of 60ºC at 30W and 55ºC at 50W
-58°F to +158°F (-50°C to +70°C)
Tests conducted against international safety standard at maximum
ambient temperatures of 60ºC at 30W and 55ºC at 50W
-58°F to +158°F (-50°C to +70°C)
Tests conducted against international safety standard at maximum
ambient temperatures of 50ºC
Mean Time Before
Failure (MTBF)
20+ years
20+ years
20+ years
Humidity
10% to 95% (non-condensing) at 35° C
10% to 95% (non-condensing) at 35° C
10% to 95% (non-condensing) at 35° C
Note the following:
All of the above instructions provide basic installation information necessary for the proper and safe functioning of this equipment. Persons installing or
maintaining this product must read all of the safety instructions and the parts of system grounding, which are applicable to the system being maintained.
Only trained, qualified service personnel shall install or maintain this product.
• Keep these instructions with the equipment.
• Do not attempt to install or service this equipment unless you are skilled in the installation and maintenance of electronic telecommunications equipment and have
successfully completed specific training for this equipment.
WARNING: FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN IMPROPER EQUIPMENT OPERATION AND/OR RISK OF ELECTRICAL SHOCK.
WARNING: ANY CONNECTION TO AN OUTSIDE PLANT LEAD, AN OFF-PREMISE APPLICATION, OR ANY OTHER EXPOSED PLANT APPLICATION MAY
RESULT IN A FIRE OR SHOCK HAZARD, AND/OR DEFECTIVE OPERATION, AND/OR EQUIPMENT DAMAGE.
Compliance and Environmental Information
All the compliance and environmental information is available on our website www.nvtphybridge.com
EC-Link+ and EC-Base
CAUTION
, Hot surface
ATTENTION
, Surface chaude
VORSICHT
, Heiße Oberfläche
PRECAUCIÓN
, Superficie caliente
VAROITUS
, Kuuma pinta
VOORZICHTIGHEID
, Heet oppervlakte
VARNING
, Varm yta
ADVARSEL
, Varm overflade
ΠΡΟΣΟΧΗ
,
Καυτή
ε
π
ιφάνεια
ATTENZIONE
, Superficie calda
CUIDADO
, Superfície quente
ATTENZJONI
, Wiċċ sħun
ETTEVAATUST
, Kuum pind
VIGYÁZAT
, Forró felület
PREVIDNOST
, Vroča površina
POZOR
, Horký povrch
ATSARGIAI
, Karštas paviršius
UZMANĪBU
, Karstā virsma
POZOR
, Horúci povrch
VARÚÐ
, Heitt yfirborð
PRZESTROGA
, Gorąca powierzchnia
FORSIKTIG
, Varm overflate
PRUDENȚĂ
,
Suprafata fierbinte
ВНИМАНИЕ
,
Гореща
повърхност
Safety Warnings and Precautions
Refer to the CLEER24 or EC10 Quick Install Guides under “Safety Warnings” for the EC adapters
Reportez-vous aux Quick Install Guides CLEER24 ou EC10 sous “Safety Warnings” pour les adaptateurs EC
Beachten Sie die CLEER24- oder EC10- Quick Install Guides unter “Safety Warnings” für die EC-Adapter
Consulte las Quick Install Guides CLEER24 o EC10 bajo “Safety Warnings” para los adaptadores EC
Katso CLEER24- tai EC10 Quick Install Guides EC-sovittimien “Safety Warnings” alla
Raadpleeg de CLEER24 of EC10 Quick Install Guides onder “Safety Warnings” voor de EC-adapter
Se CLEER24 eller EC10 Quick Install Guides under “Safety Warnings” för EC-adaptrarna
Se CLEER24 eller EC10 Quick Install Guides under "Safety Warnings" for EC-adaptere
Ανατρέξτε
στους
οδηγούς
CLEER24
ή
EC10 Quick Install Guides
στην
ενότητα
“Safety Warnings”
για
τους
π
ροσαρ
μ
ογείς
EC
Fare riferimento alla sezione CLEER24 o EC10 Quick Install Guides sotto “Safety Warnings” per gli adattatori EC
Consulte o CLEER24 ou EC10 Quick Install Guides em “Safety Warnings” para os adaptadores EC
Irreferi għall-CLEER24 jew EC10 Quick Install Guides taħt “Safety Warnings” għall-adapters EC
Vaadake CLEER24 või EC10 Quick Install Guides alusel “Safety Warnings” EC adapterid
A EC adapterek “Safety Warnings” című részében olvassa el a CLEER24 vagy a EC10 Quick Install Guides című részt
Nanašajo na CLEER24 ali EC10 Quick Install Guides pod "Safety Warnings" za EC adapterji
Další informace naleznete v příručkách CLEER24 nebo EC10 Quick Install Guides v části "Safety Warnings" pro adaptéry EC
Kreiptis į CLEER24 ar EC10 Quick Install Guides pagal "Safety Warnings" Už EC adapteriai
Skatiet CLEER24 vai EC10 Quick Install Guides zem "Safety Warnings,” lai EC adapteri
Pozrite si CLEER24 alebo EC10 Quick Install Guides v časti "Safety Warnings" pre adaptéry EC
Sjá CLEER24 eða EC10 Quick Install Guides undir "Safety Warnings " fyrir EC-millistykki
Zobacz CLEER24 lub EC10 Quick Install Guides w sekcji "Safety Warnings" w przypadku adapterów EC
Se CLEER24 eller EC10 Quick Install Guides under "Safety Warnings" for EC-adaptere
Consultați ghidurile CLEER24 sau EC10 Quick Install Guides din secțiunea "Safety Warnings" pentru adaptoarele EC
Обърнете
се
към
CLEER24
или
EC10 Quick Install Guides
в
"Safety Warnings"
за
адаптери
EC
QUICK INSTALL GUIDE
The NVT Phybridge Technical Support Group is available to assist you with product installation, configuration, monitoring and troubleshooting procedures. Should you
experience trouble with this equipment or for repair or warranty information, please contact NVT Phybridge at +1 905.901.3633 or [email protected].
Technical Support
Warranty:
The EC adapters are backed by NVT Phybridge’s award-winning customer support and 5-year warranty.
