1 - Basic Uses
Charge
Please connect the charger to the 220V mains power
outlet, the other end into the T10 charging port. The
logo backlight will blink, indicating it is being charged.
When the battery is fully charged, the logo backlight
will remain on but no longer blinking. If it is in the
power-on state, the battery charging icon on the upper
right corner of the screen will appear animation tips.
Power-on / Sleep / Shutdown:
Power-on: Press the power button, the screen will dis-
play the boot prompt. At this time, please wait a mo-
ment till the Android system is fully started and enters
the main interface.
Sleep:
When the system is powered on and you will not be
using it for a while, you can always press the power
button to get T10 into sleep state, it will then turn off
the screen and get Into standby state,
SmartQ
T10
