Advanced Video Control Unit (AVCU) User Guide
13
| www.nvisinc.com
Figure 15: The Settings Tab
If these options are grayed out, this means that your hardware does not support dithering, but it
can be upgraded.
Contact NVIS for more information at
. Valid settings for the dithering
configuration:
Use the full 8 native bits per color, with no dithering
Truncate down to 6 native bits per color, with 2 bit dither boost
Truncate down to 4 native bits per color, with 4 bit dither boost
Once you’ve set the dithering configuration, you need to go to the
Sequence
screen to select the
appropriate color sequence for your dithering configuration
.
Click the
Connection tab
. The window from
should appear, showing the sequences
currently loaded on your AVCU. The appropriate color sequences for the valid dither settings
listed on the previous page are respectively:
48212 ab smooth asic v2_0.seq (8 bit sequence w/ no dithering)
48251 ab smooth 666 v1_0.seq (6 bit sequence w/ 2 bit dithering)
48252 ab smooth 444 v1_0.seq (4 bit sequence w/ 4 bit dithering
– default)
TROUBLESHOOTING YOUR SYSTEM
