Frame Lock Configuration
Quadro Sync
DU-06574-001_v01
| 13
Enabling Frame Lock
When enabling Frame Lock across a cluster you must define a display to be the timing
server which all the clients will then connect to. Following the guidelines in the
“Connecting Nodes in a Visualization Cluster” section of this guide, it is recommended
this node be in the “middle” of the cluster.
For best results synchronizing the cluster configure the Timing Master first, then the
client machines so you can verify each client synchronizes correctly as you add it. After
the cluster is configured it is recommended to re-boot the cluster in the opposite order:
clients then Frame Lock master.
Note: When rebooting the cluster after configuration boot the client nodes first,
then once the clients are stable boot the timing master.