NVIDIA Corporation
63
Chapter 4
Using nView Multi-Display Settings
the secondary display when its resolution is set to less than the value set on the
primary display.
Procedure
Follow these steps to enable Virtual Desktop:
1
From your Windows desktop, right click to view the Windows desktop menu,
then click
Properties
>
Settings
>
Advanced
and then the NVIDIA GPU tab.
2
From the NVIDIA menu, click the
nView Display Setting
option.
3
From the nView Modes list, select
Clone
and click
Apply
.
Note:
If you just switched to Clone from Dualview, you’ll need to follow the
prompts to restart your computer. Then, when you have returned to your
desktop, go to the nView Display Setting page and select
Clone
from the
nView Modes list and click
Apply
.
4
From the nView Display Setting page, right click display image (i.e.,
1a
or
1b
) to
display the pop-up menu and click
Change Resolution
).
Figure 4.16
nView Clone Mode with Virtual Desktop Enabled — Disabling Panning
Click
Change Resolution
from
your secondary display’s context
menu.
nViewGuide_.book Page 63 Thursday, September 14, 2006 1:14 PM
