42
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Show PCHealth in Post Enabled
> Smart FAN Configurations Press Enter
Vcore 1.38V
VCC1.22v 1.21V
5VSB 4.92V
+12V 11..04V
+5V 4.33V
VDIMM 1.84V
VBAT 3.14V
CPU Temperature 33
°
C/91
°
F
System 1 Temperature 38
°
C/96
°
F
CPUFAN Speed 4440 RPM
SFAN1 Speed 3375 RPM
SFAN2 Speed 3375 RPM
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
Smart FAN Configurations
Please refer to section 3-10-1
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-10-1 Smart FAN Configurations
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Item Help
CPUFAN Smart Mode Enabled
CPU SmartFAN Full-Speed 50
CPU SmartFAN Idle Temp 30
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU/SFAN1 Smart FAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN
will works over 60% of full speed, and the higher temperature will gain higher FAN speed,
after over the temperature which this item setting, the FAN works in full speed.
