29
1.
2.
1.
2.
To remove a fan unit:
Grasping the handle with your right hand, push the latch release with your thumb while
pulling the handle outward. As the fan unit unseats, the fan unit status LEDs will turn off.
Remove the fan unit.
To insert a fan unit:
Make sure the mating connector of the new unit is free of any dirt and/or obstacles.
Insert the fan unit by sliding it into the opening until slight resistance is felt. Continue
pressing the fan unit until it seats completely.
Fan Module Latches
Make sure that the fans have the air flow that matches the model number. An air flow
opposite to the system design will cause the system to operate at a higher (less than
optimal) temperature. For power supply unit air flow direction, refer to
The green Fan Status LED should light. If not, extract the fan unit and reinsert it. After two
unsuccessful attempts to install the fan unit, power off the system before attempting any
system debug.
