Hardware Setup
Connector
MiNi-IDE
Connector:
MiNi IDE
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.
’
MiNi-IDE
PDF created with pdfFactory Pro trial version
Serial ATA Connector: SATA1, SATA2, SATA3, SATA4
This connector is a high-speed Serial ATA interface port. Each connector can con-
nect to one Serial ATA device.
SATA4
SATA1
SATA2
SATA3
Important
If you install two IDE devices on the same cable, you must configure the drives
separately to master / slave mode by setting jumpers. Refer to IDE device s
documentation supplied by the vendors for jumper setting instructions.
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
2-5
