Inno3D GeForce Graphics Card User Manual
Page 1 of 16
1. Welcome
Thank you for purchasing Inno3D Graphics Accelerator card. Before experiencing the
ultimate performance on your graphics card, please read this manual carefully and retain it
for future reference.
2. Recommended System Requirements
For optimum performance, it is suggested that your system has the following
configurations:
-
Intel® Pentium®4, AMD® Althon® or other compatible processors
-
128MB system memory
-
Optical Drive for software installation
-
A power supply with 400-watt is recommended
-
Operating system: Microsoft® Windows® XP / XP X64 / 2000
3. SLI Configuration
If you are planning on using this graphic card as part of an SLI system, the following is
required:
-
An NVIDIA SLI-Ready nForce motherboard with NVIDIA SLI Connector*
-
Two NVIDIA SLI-Ready add-in cards (with matching GPUs!)
-
Minimum Power Supply Requirement of SLI PC
•
Ultra High-End SLI PC:
You must have a power supply that can provide a minimum of +12V @ 22A of dedicated
power for the two graphics cards. Of this 22A requirement, +12V @ 5.5A must be available
to each of the two PCI Express 6-pin auxiliary power supply connectors. The remaining 11A
must be supplied to the motherboard for dedicated graphics card use.
•
High-End SLI PC:
Minimum of 500-600W Power Supply with a minimum of +12V @ 30A for all PC
components.
•
Mid-Range SLI PC:
Minimum of 450-500W Power Supply with a minimum of +12V @ 26A for all PC
components.
•
Entry-Level SLI PC:
Minimum of 400-450W Power Supply with a minimum of +12V @ 22A for all PC
components.
* Note:
The NVIDIA SLI connector is not used with some mainstream graphics card models such as the
GeForce 6600 and GeForce 7300 series.
Summary of Contents for Inno3D
Page 1: ......
