N V I D I A C o r p o r a t i o n
112
N V I D I A D i s p l a y P r o p e r t i e s
U s e r ’ s G u i d e
Enabling Dualview Mode for Windows 2000
To enable Dualview mode in Windows 2000, follow these steps:
1
Right click from your Windows desktop.
2
Click
Properties
>
Settings
tab >
Advanced
>
NVIDIA GPU
tab and the
Desktop Utilities
option from the Media Center menu.
3
Click the
Enable Dualview (Treat multiple . . )
option to insert a check
mark in the check box as shown in
Note:
Under Windows 9
x
and Windows XP, this option does not apply and,
therefore, is not available.
Figure 9.8
Desktop Utilities: Enabling Dualview (Windows 2000)
4
Click
Apply
.
5
Click
Restart your computer
when prompted.
6
After you log back on to your computer, from your desktop, right click to
view the properties menu, then click
Properties
and the
Settings
tab. You’ll
notice that two monitor images appear on the Settings panel now, which
indicates Dualview mode.
Enabling Dualview
(Windows 2000 only)
nViewGuide_.book Page 112 Monday, August 11, 2003 4:03 PM
