N V I D I A C o r p o r a t i o n
104
N V I D I A D i s p l a y P r o p e r i t e s
U s e r ’ s G u i d e
Change Format: Regional Settings
From the Device Selection panel, click
Change Format
to access the Regional
Settings (
) where you can specify a particular TV output format. The
list that appears allows you to select the TV output format based on the country
where you live.
Figure 8.23
Change TV Format: TV Regional Settings
Note:
If your country is not in the list, select the country closest to your
location.
Device Adjustments: TV Output
From the Device Selection panel, click
Device Adjustments
to open the TV
Output panel (
) where you can customize the settings for your TV
display.
Note:
Be sure to click
Apply
after you make any changes in order for the
changes to take effect.
Support of TV adjustment features described in this section depend on the TV
encoder you are using.
lists TV encoders and the TV adjustment
features they support. The first four categories of TV encoders are supported by
nViewGuide_.book Page 104 Monday, August 11, 2003 4:03 PM
