nvent Schroff 14579-030, User Manual, Page: 17 / 32

14579-030 (PXIe System)
R1.5, April 2021 8 Slot PXIe Backplane (23007-508) 13
3.6 Power Supply
The PXIe system is powered by a 600 W power supply with wide range input (100 - 240 VAC).
The power supply contacts via a connector to the PXIe backplane.
The power input is provided by an AC mains/line module with IEC 60320-C14 connector,
integrated mains/line fuses and line filter.
The fuse rating is 10 A slow blow (T10AH250V).
Figure 4: AC mains/line module
Table 1: Data AC Power Supply
e
Hazardous voltage!
Parts of the power supply may be exposed with hazardous voltage. Always remove mains/
line connector before carry out any assembly work.
Caution!
Your system has not been provided with a AC power cable. Purchase an AC power cable that
is approved for use in your country. The AC power cable must be rated for the product and
for the voltage and current marked on the product's electrical ratings label. The voltage and
current rating of the cable should be greater than the ratings marked on the product.
12309010
1 Fuse holder 3 AC Connector (IEC60320-C14)
2 Mains/line switch
Input voltage nominal 100 - 240 VAC
Mains Frequency 50 / 60 Hz
Power (max.) 600 W
Output Voltage
+3.3 V
+5.0 V
+5.0 V Aux
+12.0 V
-12.0 V
Current
25 A
25 A
1 A
30 A
2.5 A
Load Regulation
±2 %
±2 %
-
±2 %
±2 %
Ripple
±50 mV
±50 mV
±50 mV
±100 mV
±100 mV
