Inside of
panel door
NGC-UIT
display
Cable ties
1
3
11/32 Nut Driver
2
• Disconnect the cables from the NGC-UIT-OUT by
loosening the retaining screws that secure the Phoenix
connectors to the mating terminals on the NGC-UIT-OUT.
This includes the serial communications (RS-485), Relay
outputs and AC Input.
• Disconnect the wires from the Phoenix connectors. Undo
all the cable ties for the wiring bundle to the NGC-UIT-OUT.
These wires will be used for the NGC-UIT2-HAZ once it is
installed.
• Loosen and remove all 10 nuts and remove the
NGC-UIT-OUT from the panel door.
Qty Description
Manufacturer
Part Number
1
NGC-UIT2-HAZ
TTC
10332-022
1
Din 35 Rail 15 inches
any
2
Ilinx RS-232 to RS-485
converters
TTC
10332-023
1
ADAM 4069 relay
module
TTC
10332-024
Qty Description
Manufacturer
Part Number
2
Grounding terminal
Phoenix
3044128
4
Terminal blocks
Phoenix
3044102
2
Serial comm cables M-F L-Com
CSMN9MF-2.5
1
UIT2-HAZ SS window kit TTC
T1200033
2
Two position jumpers
Phoenix
3030336
Removing the Existing NGC-UIT-OUT
Removing the Existing NGC-UIT-OUT
Removing the Existing NGC-UIT-OUT
WARNING: Power to the Electrical panel that is
housing the NGC-UIT-OUT must be turned OFF
before proceeding.
KIT CONTENTS
2 | nVent.com
