12 | nVent.com
MAIN SCREEN
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:
00
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
grey area
white area
red area
contains 3 areas:
1. Actual maintain temperature (red area)
2. next event temperature (grey area)
3. Hot water storage temperature
(white area- if boiler sensor is connected and active)
additional icons for settings, relay (on/oFF), key lock or warning will be displayed.
when lock is “on” a password is needed to access the parameter menus.
after the correct 4 number password is entered, each parameter in the setup can be
changed. the unit locks again after a 10 min. time out (no keys pressed).
SETTINGS
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:
00
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
SYSTEM
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 17:
00
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
GERMANY
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
14 : 14
SELECT WATER TEMPRATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
55 °C / 50°C
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-M
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
info
general info about the unit, name, commissioning date,
firmware version, nVent contact info per country.
Test
programme
The test programme runs for 30 minutes, during which all
parameters will be ignored to check the heating cable and
the connection on site. you can stop the test programme
at any time.
reset
select “yes” to activate the Quick install menu and return
all settings to factory settings.
Quick start process restarts automatically.
service
Access for nVent sErViCE TEAm
