nVent.com | 3
1/2 in
1/2 in
5 1/2 in
Lock nut
Sealing
gasket
6
10
8
12
7
11
9
13
Do not cut through
bus wires.
• Slide heat-shrinkable
tubes over end
of cable.
• Starting from the
center of the tube,
move the heat source
continuously from
side to side.
• Starting at center of tube,
move heat source continuously
from side to side.
• Slip green/yellow tube
over braid and shrink.
• While tube is still hot, pinch
with pliers between bus wires
to seal; hold for 10 seconds.
Note: Pipe mounting
bracket and strap not
used with RaySol and
IceStop.
Note: Pipe mounting
bracket and strap not
used with RaySol and
IceStop.
Note: For junction box
with clearance hole,
use lock nut.
CAUTION: Health Hazard. Consult
material safety data sheet RAY3122.
