4 | nVent.com
BTV, QTVR
Go to Step 6
Do not cut
bus wires.
Make sure the
bus wires do not
kink, bunch, or
crossover.
5A
XTV, KTV
Make sure the
bus wires do not
kink, bunch, or
crossover.
Do not cut
bus wires.
Go to Step 6
5B
• Notch core.
• Peel bus wire from core.
• Score core between bus
wires at jacket.
• Bend and snap core.
• Peel core from bus wires.
• Remove any remaining
core material from bus
wires.
• If needed,
retwist and
straighten bus
wires.
• Insert bus wires
into guide tubes
as shown.
• Slide core sealer
onto heating cable.
• Remove the guide tubes
and dispose of them in a
plastic bag.
CAUTION: Health Hazard.
Wash hands if you contact
sealant. Consult MSDS
VEN 0058.
• Cut and remove
all fiber strands.
• Score and remove center
spacer.
• Remove any remaining
core material from bus
wires.
• If needed, retwist and
straighten bus wires.
• Insert bus
wires into
guide tubes
as shown.
• Slide core
sealer onto
heating cable.
• Remove the guide tubes
and dispose of them in a
plastic bag.
CAUTION: Health Hazard.
Wash hands if you
contact sealant. Consult
MSDS VEN 0058.
