4 | nVent.com
9 Volt
battery
Menu
Down
Up
Next
7A
8
Ø
Ø
GFCB
7B
Powering Controller via Battery
• Connect 9 VDC battery (not provided) to the supplied
battery connector.
• Plug the battery connector onto the two pins on the
controller marked “Battery Connector.”
Reprogram controller using battery connection or turning power onto the unit.
Activating and Navigating the Menu in Set-up Mode
• To activate set-up mode, press Menu button for
approximately 5 seconds.
• The display will change to the default mode for units.
• Use the Up and Down buttons to change values.
Use the Next button to change to next display
code/parameter.
• When completed, secure the enclosure cover.
Powering Controller via Line Power
• Turn on branch circuit breaker that supplies power to the
controller and heating cable.
WARNING: Shock Hazard.
Secure the wire cover in place with the four screws
before proceeding.
PROGRAMMING THE CONTROLLER
