20
|
Main Screen
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 05:00 p.m.
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
UNITED STATES
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
02:14 p.m.
SELECT WATER TEMPERATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
131°F/122°F
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-R2
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
140 °F
131°F
131°F
grey area
white area
red area
Contains
3
areas:
• Actual Maintain temperature (red area)
• Next event temperature (grey area)
• Hot water storage temperature
(white area- if boiler sensor is connected and active)
Additional icons for settings, relay (ON/OFF), key lock or warning will
be displayed.When Lock is “on” a password is needed to access the
parameter menus.
After the correct
4
number password is entered, each parameter in the
setup can be changed. The unit locks again after a
10
min. time out (no
keys pressed).
SETTINGS
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 05:00 p.m.
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
UNITED STATES
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
02:14 p.m.
SELECT WATER TEMPERATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
131°F/122°F
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-R2
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
140 °F
131°F
131°F
SYSTEM
NOW
HOT WATER MAINTENANCE
BOILER
ECONOMY TEMP
AT 05:00 p.m.
NEXT
INFO, RESET, SERVICE, TEST....
CABLE TYPE, PIPE DAIMETER,...
COUNTRY, LANGUAGES, UNITS,...
APPARTMENT, MAINTAIN, ECONOMY,....
SETTING
SYSTEM
HEATING CABLE & PIPE
GENERAL SETTINGS
WATER TEMP. & PROGRAM
INFO
TEST PROGRAM
RESET
SERVICE
STATUS
SYSTEM
KEYLOCK FEATURE
SELECT LANGUAGE
SELECT COUNTRY
SELECT DATE
SELECT TIME
SELECT ALARM
GENERAL SETTING
SELECT SAVING TIME
ENGLISH
UNITED STATES
01.10.2017
14 : 17
OFF
ON
14 : 17
14 : 17
14 : 17
14 : 17
02:14 p.m.
SELECT WATER TEMPERATURE
SELECT PROGRAM
PROGRAM TIMER
WATER TEMP. & PROGRAM
131°F/122°F
14 : 17
HOTEL
SELECT CABLE TYPE
SELECT PIPE DIAMETER
SELECT INSULATION THICKNESS
SELECT AMBIENT TEMPERATURE
SELECT BOILER SENSOR
SELECT BOILER CUT-OFF TEMPS.
HWAT-R2
DN 25
40 MM
20 °C
ON
35/85 °C
HEATING CABLE & PIPE
140 °F
131°F
131°F
Info
General info about the unit, name, commissioning date,
firmware version, nVent contact info per country.
Test
program
The test program runs for
30
minutes, during which
all parameters will be ignored to check the heating
cable and the connection on site. You can stop the test
program at any time.
Reset
Select “Yes” to activate the Quick install menu and return
all settings to factory settings.
Quick start process restarts automatically.
Service
Access for nVent SERVICE TEAM
