NuMaker NUC980 IIoT
MAY 20, 2020
Page
29
of 46
Rev 1.00
NuMaker NUC980 IIoT Board
－
Rear View
Figure 2-2 shows the main components from the rear view of NuMaker NUC980 IIoT board
VCOM ICE interface: ICE Controller NUC123ZD4AN0 (U6), USB connector (CON3) to PC
Host
Connector
Pin Name
Functions
CON3.1
VDD33
DC 3.3V
CON3.2
ICE_DAT
Serial Wired Debugger Data
CON3.3
ICE_CLK
Serial Wired Debugger Clock
CON3.4
RST#
VCOM Chip Reset, Active Low.
CON3.5
VSS
Power Ground
Audio CODEC (U11, M1, CON6, CON7, CN1): nuvoTon NAU8822L (U11) connects to
NUC980 using I2S interface
Auxiliary Input and Output(CN1)
Connector
Pin Name
Functions
CN1.1
AUXOUT1
Mono Mixed Output / Line Output
CN1.2
AUXOUT2
Line Output
CN1.3
AUXINR
Right Auxiliary Input
CN1.4
AUXINL
Left Auxiliary Input
MicroSD Card Slot: T-Flash slot (CON8)
Figure 7-2 NuMaker NUC980 IIoT Board (Rear View)
Summary of Contents for NuMaker NUC980 IIoT
