NuMaker-emWin-NK-N9H26
Mar. 26, 2021
Page
4
of 29
Rev 1.02
NUMA
K
E
R
-E
MW
IN
-NK
-N9
H
26
U
S
E
R M
A
NU
A
L
2
NUMAKER-EMWIN-NK-N9H26 INTRODUCTION
The NuMaker-emWin-NK-N9H26 uses the ARM926EJ-S CPU core as the target micrprocessor.
The NuMaker-emWin-NK-N9H26 is similar to other development boards. Users can use it to
develop and verify applications to emulate the real behavior. The NuMaker-emWin-NK-N9H26
can be a real system controller to design users’ target systems, supports USB2.0 Host/Device
high speed interface, microphone, audio headphone out, audio amplifier, speaker out, JTAG
interface, SPI Flash and RS-232 interface.
NuMaker-TFT-LCD5 is a LCM display with touch panel adaptor, it is supporting Pixel Format
480(RGB)/272 resolutions.
The NuMaker-emWin-NK-N9H26 development connects JTAG port to your target system (via
JTAG adaptor tool) and allows you to program and debug embedded programs on the target
hardware.
Figure 2-1 NuMaker-emWin-NK-N9H26 PCB Board (Front)
SPI1 to UARTs
(CON6)
LCM Interface
(CON5)
Extended Connector
(JP2)
Keys Matrix
(S1~S6)
