NuMaker-M251KG
Aug.
08, 2020
Page
7
of 49
Rev 1.00
NuMa
k
er
-M
25
1
K
G
U
S
E
R
MA
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-M251KG is a development board for Nuvoton NuMicro
®
M251 microcontrollers module.
The NuMaker-M251KG consists of two parts: a M251 platform and an on-board Nu-Link2-Me
debugger and programmer. The NuMaker-M251KG is designed for project evaluation, prototype
development and validation with power consumption monitoring function.
The M251 platform is based on NuMicro
®
M251KG6AE. For the development flexibility, the M251
platform provides the extension connectors of M251KG6AE, the Arduino UNO compatible headers
and able to adopt multiple power supply. Furthermore, the Nuvoton-designed ammeter connector can
measure the power consumption instantly, which is essential for the prototype evaluation.
In addition to the M251 platform, there is an attached on-board debugger and programmer
“Nu-Link2-
Me”. The Nu-Link2-Me supports on-chip debugging, online and offline ICP programming via SWD
interface. The Nu-Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC.
Besides, the programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could
be detached from the development board and becoming a stand-alone mass production programmer.
Figure 1-1 NuMaker-M251KG Board
