NuMaker-M030GTD
Nov. 17, 2022
Page
7
of 46
Rev 1.00
N
UMA
K
E
R
-M0
3
0
G
TD
U
S
E
R MA
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-M030GTD is an evaluation board for Nuvoton NuMicro M030GTD, M030GGD,
M030GTC and M030GGC microcontrollers. The NuMaker-M030GTD consists of two parts: a M030G
target board and an on-board Nu-Link2-Me debugger and programmer. The NuMaker-M030GTD is
designed for project evaluation, prototype development and validation with power consumption
monitoring function.
The M030G target board is based on NuMicro
M030GTD1AE. For the development flexibility, the
M030G target board provides the extension connectors, the Arduino UNO compatible headers and the
capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter
connector can measure the power consumption instantly, which is essential for the prototype
evaluation.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-
Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-
Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the
programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached
from the evaluation board and become a stand-alone mass production programmer.
Figure 1-1 NuMaker-M030GTD Evaluation Board
