NuMaker-M029GGC
Nov. 17, 2022
Page
7
of 45
Rev 1.00
N
UMA
K
E
R
-M0
29
G
G
C
U
S
E
R M
A
NU
A
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-M029GGC is an evaluation board for Nuvoton NuMicro M029GGC microcontrollers.
The NuMaker-M029GGC consists of two parts: a M029G target board and an on-board Nu-Link2-Me
debugger and programmer. The NuMaker-M029GGC is designed for project evaluation, prototype
development and validation with power consumption monitoring function.
The M029G target board is based on NuMicro
M029GGC0AE. For the development flexibility, the
M029G target board provides the extension connectors, the Arduino UNO compatible headers and the
capability of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter
connector can measure the power consumption instantly, which is essential for the prototype
evaluation.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-
Me supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-
Link2-Me supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the
programming status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached
from the evaluation board and become a stand-alone mass production programmer.
Figure 1-1 NuMaker-M029GGC Evaluation Board