NuMaker-HMI-M032KI
May 25, 2022
Page
7
of 58
Rev 1.00
N
UMA
K
E
R
-HMI
-M
03
2
K
I U
S
E
R
M
A
NUA
L
Ma
k
er Nu
-m
be
d
NUC
47
2
Us
er Man
ua
l
1
OVERVIEW
The NuMaker-HMI-M032KI consists of two parts, a NuTFT Kit Board and a NuMaker-M032KI board.
The NuMaker-M032KI consists of an M032 target board and an on-board Nu-Link2-Me debugger and
programmer. The NuMaker-HMI-M032KI allows users to quickly develop, easily program, and debug
application.
The M032KI target board is based on NuMicro
M032KIAAE. For the development flexibility, the M032KI
target board provides the extension connectors, the Arduino UNO compatible headers and the capability
of adopting multiple power supplies. Furthermore, the Nuvoton-designed ammeter connector can
measure the power consumption instantly, which is essential for the prototype evaluation.
In addition, there is an attached on-board debugger and programmer
“Nu-Link2-Me”. The Nu-Link2-Me
supports on-chip debugging, online and offline ICP programming via SWD interface. The Nu-Link2-Me
supports virtual COM (VCOM) port for printing debug messages on PC. Besides, the programming
status could be shown on the built-in LEDs. Lastly, the Nu-Link2-Me could be detached from the
evaluation board and become a stand-alone mass production programmer.
The NuTFT Kit Board is a daughter board that extends the NuMaker development boards. The NuTFT
Kit Board requires NuMaker development board as mother board to create a GUI development platform.
All Nuvoton NuMaker development boards support this kit board. It is designed for LCD display or GUI
evaluation, prototype development and validation. Besides, Nuvoton provides emWin GUI library on
NuMaker-NUC126 and NuMaker-M032KI. By using NuMaker-NUC126 or NuMaker-M032KI as the
mother board, user can create a powerful and stunning graphics for the embedded system.
The NuTFT Kit Board is equipped with one SPI flash, one LCD panel with touch function, one five
direction joystick and two push buttons. NuTFT Kit Board pin arrangement is compatible with Arduino
UNO. The driver IC of the LCD panel is ILI9341, for more detailed information about the LCD panel,
please refer to the ILI9341 datasheet.
Figure 1-1 NuTFT Kit Board
