NAU8224
NAU8224 User Manual
April, 2016
Rev 1.0
be programmed using the text box and buttons on panel 1 or by moving the slider on panel 3.
Panel 2 is used to reflect the value of the read only register 0x04 or the Gain setting of jumper J25.
The Read All and Update button is used to reflect the changes in the register values in the register
map. For example if the Gain jumper is changed on the board, to reflect the changes in the register
map the Read all and update button must be clicked.
The Quit button is used to exit from the GUI.
1
Revision History
VERSION
DATE
PAGE/
CHAP.
DESCRIPTION
V.05
Oct. 8, 2013
-
First Release.
V1.0
April, 2016
-
Updated content
Important Notice
Nuvoton products are not designed, intended, authorized or warranted for use as components in systems or
equipment intended for surgical implantation, atomic energy control instruments, airplane or spaceship
instruments, transportation instruments, traffic signal instruments, combustion control instruments, or for other
applications intended to support or sustain life. Furthermore, Nuvoton products are not intended for applications
wherein failure of Nuvoton products could result or lead to a situation where personal injury, death or severe
property or environmental damage could occur.
Nuvoton customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Nuvoton for any damages resulting from such improper use or sales.
Please note that all data and specifications are subject to change without notice. All the trademarks of products
and companies mentioned in this datasheet belong to their respective owners.