GETTING STARTED
•
Remove the unit from the box.
•
Remove any packaging from the product.
•
Please read all instructions and retain all packaging until you have checked and
counted all of the parts.
PACKAGE CONTENTS
•
Vibrating Lumbar Support Pillow
•
Instruction Manual
DESCRIPTION OF PARTS
Turn the massager ON/OFF by
pressing the Power button on the
control panel.
While the massager is turned ON,
cycle through the 6 massage modes
by pressing the Mode button on the
control panel.
Vibration
–
Strong
–
Kneading
–
Shiatsu
–
Combine
–
Weak
Vibrating
Auto Off after 20 minutes
’
operation.
INSTALLATION OF BATTERIES
Unzip the side of pillow. You will see the battery compartment.
Slide to open the cover of the battery compartment.
Install/replace 2 AA Batteries (Not included) as per the polarity indicated.
Replace the battery cover back to the compartment to make sure it closed properly.
Note: Do not mix old and new batteries and type of batteries, such as, alkaline,
standard (Carbon
–
Zinc), or rechargeable (Nickel
–
Cadmium) batteries.
