Nuvo NV-A4S-DC, Installation Manual

Page: 24 / 32

21
Simplese D Specifications
Zones 1-4 Power Amplifier Outputs System
Power Requirements
Preamplifier Section
Physical Specifications
Source Inputs 1-4
Emitter Outputs
Continuous Average Output Power 30W (15W x 2) System On 5V @ 50mA
Two channels driven 30-20kHz @1% THD External Mute 3-12V DC
Rated Distortion (1/2 power) 0.40%
Rated Impedance 6 Ohms
Damping Factor 50+ Power Supply 90-260VAC 50/60Hz
Frequency Response (20-20kHz) 2dB Power Consumption all channels 140W
driven to full-rated power
Power Consumption average
30W
Variable output 0-600mV operating conditions
Fixed output 600mV Power Consumption no signal Less than10W
Impedance 600 Ohms
Unit Size Millimeters 44 H. x 430 W. x 270 D.
input Impedance 10K Unit Size Inches 1.75 H. x 17 W. x 10.625 D.
Input Sensitivity for rated power 300mV RMS Unit Weight Kilograms 2.95
Input Overload 3V RMS Unit Weight Pounds 6.5
NuVo reserves the right to change specifications
Source Outputs 4 without notice.
Output Drive Current 100mA
Output Drive Voltage 5V
Source 1&2 38kHz/56kHz Selectable
Source 3&4 38kHz
Compatible with single and dual emitters
+