Nuvo AccentPLUS NV-AP16OW, Installation Manual

Page: 3 / 6

1
Congratulations on your purchase of the NuVo AccentPLUS1 and AccentPLUS2 Outdoor Speakers. A durable mineral filled, UV -
resistant cabinet and powder-coated aluminum grill are able to withstand the elements and through careful design, are capable of
superior audio reproduction. The secret is in a honeycomb pattern molded into the enclosure that provides important rigidity and
also houses a special bituminous, acoustically inert material that eliminates unwanted resonance. Whether you are listening to
the AccentPLUS1 or AccentPLUS2 models, the increased bass and treble response will heighten any listening experience.
AccentPLUS Outdoor Speaker Installation Guide
Speaker Placement
Proper placement of the speakers is crucial to enjoying the benefits of the AccentPLUS Outdoor Speakers. Consider the optimal
listening area. The speakers should ideally be placed facing that area with 8 - 10 feet of separation or if you are using the stereo
speakers try to center it within the space. The on-wall bracket provided with the speakers allows them to be angled ideally at the
ear level of the listener.
Properly Mounting the Speakers
Each speaker is shipped with two types of mounts. One is a tripod
that allows each speaker to sit on a tabletop or shelf. The other is
a U-shaped bracket that is designed for mounting the speakers
on a wall.
Tabletop Mount
To use the included tabletop mount, locate the bottom of the
speaker. This is the inset mounting screw with a small hole
positioned next to it. This is designed to receive the small peg
molded on the top of the tripod. The speaker and the tripod also
have corresponding bevels that interlock. Line up the peg with
the hole and the interlocking bevels on both the stand and
speaker and secure the stand to the speaker with the included
end cap, fig. 1. Once secured the speaker will stand upright on
any level surface.
Wall Mounting
A U-shaped bracket is shipped with each speaker designed for
mounting the speaker horizontally on a wall. The beveled
surfaces on the inside of the mount and on the exterior ends of
the speaker allow the speaker to be tightened and angled
appropriately toward the listening area. The end caps provided
with the speakers tighten the bracket to the speaker enclosure to
hold the speaker at the desired angle, fig. 2.
Fig. 1
Fig. 2