1.
2.
3.
4.
5.
Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth.
Never use cleaning agents or abrasive solvents.
Do not clean any part of the product with thinners or other solvents and chemicals – this may cause
permanent damage to the product which is not covered by the warranty.
Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don’t let it get wet.
If something does go wrong, please do not try to repair it yourself – contact Customer Service for assistance.
CLEANING
At the end of the product lifecycle, you should not dispose of this product with normal household waste.
Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on
the product, user’s guide and/or box indicates this. Some of the product materials can be reused if you take
them to a recycling point. By reusing some parts or raw materials from used products you make an important
contribution to the protection of the environment. Please contact your local authorities in case you need more
information on the collection points in your area. The internal battery should be disposed of with the Parent
unit in an environmentally-friendly manner according to your local regulations.
DISPOSAL OF THE DEVICE (ENVIRONMENT)
1.
2.
3.
4.
Baby unit
Parent unit with belt clip
Stand for Parent Unit
5V AC adapters x 2
PACKAGE CONTENTS
TROUBLESHOOTING
Baby Unit has no transmission
Always transmitting
Mic sensitivity is too low
Mic sensitivity is too high
Battery has run out or USB cable
improperly connected
Adjust mic sensitivity higher by
using + button 2
Adjust mic sensitivity lower using
- button 3
Replace with new battery or check
connection
PROBLEM
POSSIBLE CAUSES
SOLUTION
Out-of -range alarm always on
Baby Unit battery has run down
Distance between Baby Unit and
Parent Unit exceeds the operating
range
Pairing is not successful
Replace with new battery or
use USB cable connecting to 5V
supply.
Move the Baby Unit and Parent
Unit closer together.
Perform pairing again.
AMBIENT TEMPERATURE
Whenever the baby’s room temperature falls outside the range as preset by the high and low temperature
limits, an alarm will be heard, icon “D” in red or white colour will show up and temperature reading starts
flashing on icon screen.
LULLABY
1.
2.
3.
4.
The LULLABY function on BU can be remotely controlled by parents. Short press button 14 to turn on
music, while the no. 1 – 6 flashing on icon screen, use buttons 15 16 to select the music. To stop music,
short press button 14 again. Once the music starts, it will play for 20 min and then stop automatically. Such
arrangement is to avoid waking up the baby in case he falls asleep. When baby starts crying again for over
15 sec., the music will resume playing for another 20 min and then stop, detecting for further baby cry.
During music playing, if the “TALK” button is pressed, the music will be paused and BU will only hear the
parent’s voice.
Note: Once the no. 1 – 6 changes back to temperature reading, pressing buttons 15 16 to adjust the
PU speaker volume but not selecting the music. During music playing, the baby’s cry may not become
noticeable since the music may distract the parent’s attention. So it is strongly recommended to turn
off the music momentarily at regular intervals to listen to activity of baby.
It is possible for parent to talk back to baby to soothe baby’s emotion. Press hold button 11, icon “O” show
up on icon screen. Speak towards the microphone. Release button 11 after finish speaking. It is worth
noted that the parent can talk back anytime they prefer, even when the BU is transmitting.
Note: Each time button 11 is short pressed and released, the BU will be set to transmit for 10 sec
before returning to standby mode (even baby is not making any sound). This is useful for parents to
monitor the activity of baby’s room when baby is sleeping.
The various alarm is designed to have following priority (only one kind of alarm can be heard at any time to
avoid confusion):
Out of range alarm > Breathing alert > Temperature alarm > Feeding alarm > Battery low alarm
Each time anyone of button 13 14 15 16 is pressed, a beep tone will be heard to validate your entry.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Use only the supplied AC adapters, use of other adapters may cause damage to the baby monitor.
When not using the monitor for a long period of time, remove all batteries from the PU, BU and Baby
Motion Sensor Mat to avoid damage due to battery leakage.
Disconnect the AC adapter from the wall outlet when the monitor is not to be operated.
The unit is best performed within a temperature range of -10°C/14˚F to +50°C/122˚F.
Do not open the cabinet, no serviceable parts inside.
The unit should not be exposed to dripping, splashing and that no objects filled with liquids, such as vases
shall be placed on it.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire
or the like.
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable
Only use the power supply as included in the packaging.
PRECAUTIONS
An alarm can be muted by short press of any one button 11 13 15 16. However, the alarm icon will keep
showing on icon screen until the condition is rectified.
HOW TO DISABLE ALARM SOUND
