Live View Introduction
DVR User Manual
32
Add Scheme
Click
in area
①
to create a new scheme. Click
on the top right corner of the
scheme to delete it.
Configure Scheme
a) Select a scheme in area
①
and then click the screen mode button on the tool bar to set the
screen mode of the scheme.
b) Select a camera window in area
②
and then double click the camera in area
③
. The
camera will be added into the selected window. One camera in the same scheme cannot repeat.
You can click the right-click menu “Clear” in area
②
to remove a single camera or click
to remove all the cameras.
c) Click “Apply” to save the settings.
Start Sequence View
Go to live view interface and then click
to pop up a window. Set the dwell time in the
window and then click
to start scheme view in sequence. Double click the sequence view
interface to pause the view; double click again to restore the view. Click
to stop the view.
Secondary Output
Note:
You can set the secondary output preview if the DVR has dual outputs. Refer to the interface as
shown below.
Summary of Contents for Xcel TD-PL1600
Page 1: ...D PL1600 D R USER MANUAL 1 3 3 ...
Page 67: ...Record Disk Management DVR User Manual 60 ...
Page 127: ...FAQ DVR User Manual 120 Fig 9 2 ...
Page 130: ...TD LA4 ...